Print Friendly

G-TEC Three-phase UPS systems (Uninterruptible Power Supply)

GTec Modular UPS MUST 900

GTec increases the modular UPS range with the new MUST900. The hightest performance and safest supply for large server room and critical load.

  • 30kVA power module based
  • Modular system up to 900kVA
  • Total hot swappable configuration

Main Features – Power Module 30kVA/27kW

  • Coated PCBs inside for stronger environment application
  • Innovation cooling system avoiding air flowing over the internal PCB for double protection
  • Fan speed control for less dissipation and longer life time
  • Output PF 0,9
  • DSP control with microprocessor
  • PWM Technology with IGBT
  • Scheduled and manual battery test available
  • Two-Step intelligent charging Mode
  • Perfect sine wave output, three level IGBT inverter bridge with Pulse ì- Width modulation PWM to reduce noise, digital control with DSP
  • Efficiency more than 95% in double conversion
  • Input rectifier with IGBT technology PFC guarantees input PF>0,99 and very low input current distorsion

System

  • Small Parallel Management: system maintains switched ON the lowest number of modules necessary to supply the load assuring redundancy. Maximum efficiency in any load condition permits to save costs
  • Smart Maintenance Management: total control of capacitor and fan runtime allow to shedule service in preventive mode
  • 10,4″ completely touch LCD display easy to read and use
  • All parameters of system available from LCD
  • Standard communication interfaces: RS232 Smart and Smart USB
  • Intelligent slot interface SNMP Card (option)
  • Programmable Dry contact available in standard configuration
  • RS232 and RS485 for easy monitoring
  • Funzione Cold Start
  • Remote EPO control
  • Manual Bypass switch

G-TEC Power - MUST 400 200KVA

G-TEC Power - MUST 400 20kVA Power Module

G-TEC Modular UPS MUST 400

MUST 400 is a modular UPS composed of 20 kVA three-phase pull-out modules designed for large IT systems.

In one cabinet can be installed up to 10 modules for a total of 200 kVA. Two cabinets can work in parallel to obtain 400 kVA power.

Modular MUST 400 solution has many advantages. It can be adapted according to the actual power required by the IT system, it allows a redundancy with a minimum cost by adding only one module and, should a failure occur, it allows the immediate replacement of the UPS. As a consequence, you have less energy consumption, higher reliability in comparison with the common UPS and cheaper repairing costs.

  • Modular UPS suitable for high performance
  • The UPS, standard 19’’ modules housed in the cabinet
  • Work in parallel sharing the load to be provided
  • In case of failure of one module, the latter will be automatically excluded without supply interruption of the others
  • Digital control has DSP (Digital Signal Processor)
  • Efficiency more than 95%

G-TEC Power - MUST 30_120

G-TEC Power - MUST 30_120 Modules

G-TEC MUST 30/120: modular UPS, 15 kVA three-phase modules

MUST is a modular UPS composed of 15 kVA three-phase pull-out modules. It is designed critical loads for medium and large data centers.

Modular Must 30/120 solution has many advantages. It can be adapted to the actual power required by IT system, it allows system redundancy with minimum cost adding only one module and, in case of failure, the immediate replacement of the damaged UPS. As a consequence it brings higher energy savings, higher reliability in comparison with the common UPS and lower repairing cost.

MUST 30/120 is available in the three-phase range from 15 kVA to 120 kVA and in 30 kVA, 60 kVA, 120 kVA cabinets.

  • UPS, standard 19‘’ modules housed in a cabinet
  • Work in parallel sharing the load and, in case of failure of one of them, the same will be automatically excluded without performance interruption for the others
  • Digital control has Digital Signal Processor
  • Efficiency is more than 94%
  • Each module is an independent UPS to grant maximum reliability

G-TEC Power - Sirius

G-TEC SIRIUS: On-line double conversion UPS – single-phase or three-phase

Sirius is an UPS designed to protect medium and large IT systems and its performances are the best for its category. Sirius allows great energy savings thanks to its high performance.

Sirius is available in the single-phase range from 10 kVA to 20 kVA and in three-phase range from 10 kVA to 120 kVA and with parallel of 6 units up to 720 kVA.

  • Efficiency is over 96%
  • The digital control has Digital Signal Processor
  • ECO Mode
  • In parallel up to 6 units
  • Different batteries such as VRLA AGM Ni-Cd and Gel
  • IGBT rectifier allows very low current distortions to the network (PFC technology)
  • Inverter without output transformer is high-frequency and the total efficiency is over 96%

G-TEC Power - NS3000 Open

G-TEC Power - NS3000

G-TEC NS3000: uninterruptible power supply with PFC tecnology.

NS 3000 is available in the three-phase range of 10 kVA, 20 kVA, 30 kVA. The NS 3000 is designed for medium and large power IT systems and for applications in critical environments.

It can work in ECO Mode, in parallel with up to 6 units, and with different batteries such as VRLA AGM and Gel, Ni-Cd.

Electronic boards are tropicalized. It is equipped to house dust filters, and the electronic core of the system is isolated in a drawer to allow an easy replacement in case of failure.

For these specific characteristics NS 3000 is the best solution for aggressive environments and its maintenance is easier in critical sites such as those industrial and naval.

  • Efficiency more than 95%
  • IGBT inverter with high frequency PWM modulation for low noisiness
  • Very low harmonic current distortion to mains (PFC technology)
  • ECO Mode
  • In parallel with up to 6 units
  • Different batteries such as VRLA AGM and Gel, Ni-Cd

G-TEC Power - Libra PRO

G-TEC LIBRA PRO: reliability of IGBT technology for High Performance Computing centers – single-phase or three-phase

Libra Pro is the solution for big projects with critical issues. It is available in the single-phase range from 10 kVA to 100 kVA and in the three-phase range from 10 kVA to 800 kVA and in parallel with 8 units up to 6400 kVA. Designed to meet customer needs with a very high efficiency/heavy loads, the Libra series combines innovation and simplicity with low ownership and maintenance costs. It is designed for large Data Center, IT solutions, and industrial applications for critical loads. The Libra Pro series is a three-phase input and three-phase output double conversion system with full Microprocessor control. The inverter built-in IGBT technology and filter allows a perfect sinewave output, which is filtered, stabilized and regulated. The rectifier has a very low distortion (THD<3%) in the CLEAN version where an input filter is installed. The Libra Pro series has maximum reliability and power availability, the parallel system can reach up to 8 units in capacity or N+1 redundancy; eventually the UPS Group Synchroniser (UGS) and the Parallel System Joiner (PSJ) allow increases to the system reliability.

  • 8 units in capacity or N+1 redundancy
  • Inverter with integrated isolation transformer and the rectifier with IGBT technology
  • Isolation output transformer
  • The digital control has Digital Signal Processor
  • Rectifier with very low distortion (THD<3%) in the CLEAN version where an input filter is installed
  • Rectifier is available also with SCR (6 or 12 pulses) and with optional selective filters to reduce harmonic distortions
  • Monitoring software, SNMP/WEB card to connect by LAN/internet, dry-contact card and RS232 interface
  • No impact on the net
  • Intelligent Battery Management